To control cost
(and almost anything else)
think inside the box

(Single Pulse Generator, Delayed Interval, Delay on Operate/Single Pulse on Operate)
OPERATION: Upon application of input voltage, the delay on make time delay (TD1) begins, the output remains de-energized. At the end of this delay, the output (relay or solid state) energizes and the interval delay (TD2) begins. At the end of the interval delay (TD2), the output de-energizes.
RESET: Removing input voltage resets the output, the time delays and returns the sequence to the first delay.
Function can be applied to these Series:(Click to View Data Sheet) HRPD, KRPD, KSPD, NHPD,

V = Voltage    NO = Normally Open Contact    R = Reset 
   NC = Normally Closed Contact    TD1, TD2 = Time Delay