To control cost
(and almost anything else)
think inside the box

OPERATION: Input voltage must be applied before and during timing. The output is de-energized before and during the TD1 time delay. Each time S1 closes, the time delay progresses; when it opens, timing stops. When the amount of time S1 is closed equals the full TD1 delay, the output (relay or solid state) energizes for TD2. Upon completion of TD2, the output relay de-energizes. Opening S1 during TD2 has no affect.
RESET: Removing input voltage resets the time delay, output relay, and the sequence to the first delay.
Function can be applied to these Series:(Click to View Data Sheet) HRPD, KRPD, KSPD, NHPD

Accumulative Delay on Make/
Interval

V = Voltage    NO = Normally Open Contact    R = Reset 
   NC = Normally Closed Contact    TD1, TD2 = Time Delay   
    S1 = Initiate Switch