To control cost
(and almost anything else)
think inside the box

Function Limited to Switch Adjustable ProgramaCubes^®
OPERATION: Input voltage must be applied before and during operation. Each time S1 is closed, a count is added. When the total number of S1 closures equals the total count selected on the unit, the output energizes. The output remains energized for the pulse duration specified for the product, and then de-energizes. If S1 is closed while the output is energized, a count is not added. If S1 is closed when input voltage is applied, a count is not added.
RESET: The unit automatically resets at the end of each operation. Removing input voltage resets the output, counter, and pulse delay.
Function can be applied to these Series:(Click to View Data Sheet) HRPU, KSPU, NHPU

OPERATION: Input voltage must be applied before and during operation. Each time S1 is closed, a count is added. When the total number of S1 closures equals the total count selected on the unit, the output energizes and the interval time delay begins. The output de-energizes at the end of the time delay. If S1 is closed during the time delay, a count is not added. If S1 is closed when input voltage is applied, a count is not added.
RESET: The counter is reset during the time delay, the unit automatically resets at the end of the interval time delay. Removing input voltage resets the output, counter, and time delay.
Function can be applied to these Series:(Click to View Data Sheet) HRPU, HSPZ, KSPU, NHPU

V = Voltage    NO = Normally Open Contact    R = Reset 
   NC = Normally Closed Contact   TD, TD1, TD2 = Time Delay   
    S1 = Initiate Switch   C = Count   P = Pulse Duration