SSAC ProgramaCube Interactive Selection Guide

Factory Fixed Time Delays

Fixed time delays from 0.1 s to 1000 hours in most series
Fixed time delays provide up to 0.1% repeat accuracy
Fixed time delays are available at standard lead times
No minimum quantity or extra charge to order a fixed time delay
Factory set and pre-tested to reduce installation time and setup adjustment
Fixed time delays can be used for all standard functions
Custom functions with fixed delays can include 3 or more time delays
Fixed time delays are available on:
KRPD, KRPS, HRPD, HRPS, KSPD, KSPS, NHPS and NHPD Series

Single Onboard Adjustable Time Delays

Adjustable time delays are available in 9 ranges:
0.1 to 10 in secs, mins, or hours
1 to 100 in secs, mins, or hours
10 to 1000 in secs, mins, or hours
Repeat Accuracy is +/- 0.5%

Onboard time delays are screwdriver adjustable.

A reference dial scale is included

Custom time delay ranges are available(minimum quantity applies)

Available on: KRPS, HRPS, KSPS, & NHPS Series

Single Externally Adjustable Time Delays

Externally adjustable time delays are available at standard lead times.
Adjustable time delay ranges are 0.1 to 10, or 1 to 100, or 10 to 1000
in secs, mins, or hours
External adjustment requires a customer supplied 100K ohm potentiometer
The potentiometer must be rated for the input voltage of the application
The external adjustment terminals are not isolated from the input voltage
Broken connection protection is included: If the external adjustment value exceeds 200 K ohms, the unit does not operate.
Custom time delay ranges are available (minimum quantity applies)

Single Switch Adjustable Time Delays or Predetermined Counting

Adjustable time delays are available in 6 ranges:
0.1 to 102.3 in secs, mins, or hours
1 to 1023 in secs, mins, or hours
Counts from 1 to 1023 in 3 ranges
1 to 165 direct reading scale
1 to 1023 binary scale
1 to 7 counts to start, then an interval time delay
Positive selection of the delay or count, saves time and money
Closed switches are added to get the total time delay or total count
± 1% Setting Accuracy
± 0.1% Repeat Accuracy
Available on: HRPU/HRIU, KSPU, and NHPU Series

Dual Onboard Adjustable Time Delays

Adjustable time delays are available in 9 ranges:
0.1 to 10 in secs, mins, or hours
1 to 100 in secs, mins, or hours
10 to 1000 in secs, mins, or hours
Any combination of the 9 ranges is acceptable
Repeat Accuracy is +/- 0.5%
Onboard time delays are screwdriver adjustable.
A reference dial scale is included
Custom time delay ranges are available (minimum quantity applies)
Available on: KRPD, HRPD, KSPD, & NHPD Series

Dual Externally Adjustable Time Delays

Externally adjustable time delays are available at standard lead times.
Adjustable time delay ranges are 0.1 to 10, or 1 to 100, or 10 to 1000
in secs, mins, or hours
Any combination of the 9 ranges is acceptable
External adjustment requires two customer supplied 100K ohm potentiometers
The potentiometer must be rated for the input voltage of the application
The external adjustment terminals are not isolated from the input voltage
Broken connection protection is included: If the external adjustment value exceeds 200 K ohms, the unit does not operate.
Custom time delay ranges are available (minimum quantity applies)

Dual Time Delays, Mixed Adjustment or Fixed Time Delays

Onboard and externally adjustable time delays are available at standard lead times. Adjustable and fixed delays may be combined.
No minimum quantity required to order adjustment combinations
No extra charge for adjustments combinations
Adjustable time delay ranges are 0.1 to 10, or 1 to 100, or 10 to 1000
in secs, mins, or hours
Any combination of the 9 ranges is acceptable
Onboard time delays are screwdriver adjustable
A reference dial scale is included
External adjustment requires a customer supplied 100K ohm potentiometer
The potentiometer must be rated for the input voltage of the application
The external adjustment terminals are not isolated from the input voltage
Broken connection protection is included: If the external adjustment value exceeds 200 K ohms, the unit does not operate.
Custom time delay ranges are available (minimum quantity applies)

Dual Switch Adjustable Time Delays or Predetermined Counting

Adjustable time delay ranges are available in 7 ranges:
0.1 to 102.3 in secs, mins, or hours
1 to 1023 in secs, mins, or hours 1 to 512 in secs or mins
Counts from 1 to 1023 in 2 ranges
1 to 165 direct reading scale
1 to 1023 binary scale
Positive selection of the delay or count, saves time and money
Closed switches are added to get the actual time delay or total count
± 1% Setting Accuracy
± 0.1% Repeat Accuracy
Combinations of counting and timing available at standard lead times
Available on: HSPZ Series

About SSAC	Product Selection	Customer Service	News Center	Contact Directory	Site Map	Terms of Sale
Express Catalog	Full Line Catalog	Product Index	Custom Products	ProgramaCube	Approvals	Warranty/Returns

								Mouse Over Photo
Fixed Delay	Single Onboard	Single External	Single DIP Switch	Dual Onboard	Dual External	Dual External / Onboard	Dual Switch Adjustable