SINGLE SHOT(One Shot Relay, Single
Shot Interval, Pulse Shaping)
- OPERATION/TIME DIAGRAM
OPERATION:Power must be applied to the
input before and during timing. Upon momentary or maintained closure
of the initiate switch (leading edge triggered), the output is energized
(relay is transferred) for a measured interval of time. At the end
of the delay, the output de-energizes. Opening or reclosing the initiate
switch during timing has no effect on the time delay.
RESET:Reset occurs when the time delay is complete and the initiate
switch is opened. Loss of power resets the time delay and output.
|
