Take the Stress out of Starting (and Spend less Time Stopped)
Getting started can be stressful, belts break, gears grind and couplings crack. Repairing broken components equals lost time and money. The new ABB PST Series softstarter takes the stress out of starting induction motors and increases productivity and decreases downtime.

• Quick-set macros provide optimal starting and stopping not just for pumps but also centrifugal fans, compressors, conveyors, mixers, crushers and other demanding applications.
• Available for three-phase induction motors from 208VAC to 690VAC
• Advanced motor protection including: dual element electronic overloads, stall, phase loss, winding over temperature and much more . .
• CSA approved, CE Marked and UL listed from 1 HP to 1800HP
• Includes a 2-line, 4 button, 10 language, LCD interface for fast set-up.
• Designed for advanced network communication with: Profibus ®,
  DeviceNet^TM Modbus, or even TCP/IP over Ethernet using ABB Fieldbusplug^TM technology.
• May be wired "inside delta" for Star-Delta starting

ABB's large A-Line Contactors are the result of an in-depth analysis of customer requirements. Optimizing the mechanical, electrical and aesthetic design was key to producing the A-Line system concept that provides a new generation of coordinated, close-coupled low voltage products.

• Contactors are coordinated with the ABB molded case circuit breakers, disconnect switches and overload relays
• Provides designers, panel builders and end users with the best performance, reliability and flexibility.
• Pre-assembled connections bar kits allow the close-coupling of ABB components to save space, assembly material, installation time and minimizes cabling.
• The new design of the large A-line contactors, places the magnet at the top of the unit and the main contact system at the bottom. This design provides a number of advantages over previous designs:

«   Easy connection between the contactor and other system components because the terminals are at the same level.
«   All connections to the control circuits are easily accessible from the front which facilitates installation and measurement.
«   Not necessary to remove power cables for inspection and maintenance.
«   Electrical operation of the contactor is impossible during contact inspection since the magnet system is removed with the front section.
«   Low, built-in terminals and the option of terminal shrouds give you a touch-safe solution.
«   NEMA, UL, IEC, CSA, VDE approved international standards

A complete range of MCCBs designed to play with the BIG boys. Tmax has the ratings to match or exceed market requirements, in a compact single or three pole molded package. A small foot print and high interrupting capability makes the Tmax suitable for almost every application.

Single pole Tmax have the ratings to match or exceed market requirements.
•   15 - 100 A, 277 VAC, 18 KAIC
•   Compact molded package, 5.12" H x 1" W x 4" D

The new Tmax MCCB range includes:
•   T1 100 A, 277 Vac Single Pole Thermal Magnetic Breakers
•   T1 100 A, 480 Vac Three Pole Thermal Magnetic Breakers
•   T2 100 A, 480 Vac Three Pole Electronic or Thermal Magnetic
•   T3 225 A 480 Vac Three Pole Thermal Magnetic
•   UL, CSA, and IEC approved

Finally, hard-to-find and standard timing and counting functions at standard lead times. The ProgramaCube® series of factory programmable relay or solid state output modules is becoming the most popular timing solution with OEM's and custom equipment builders.

•   In Stock, Factory Programmed, Shipped Fast
•  24 Standard Functions
•  Choose From Single or Dual Timing Functions
•  Microcontroller Circuitry, to 0.1% Repeat Accuracy
•  1 to 20 A Solid State or 10 A SPDT Relay Output
•  Accurate Switch Adjustment (KSPU/NHPU)
•  Knob, External Adjust, or Fixed Time Delay
•  12 to 230 V in 6 Ranges
•  Delays From 100 ms to 1023 h in 9 Ranges
•  Counting to 1023 Counts (in 3 Ranges)
•  0.25 in. (6.35 mm) Male Quick Connect Terminals
•  Surface Mount with One #10 (M5 x 0.8) Screw
•  2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
•  UL Recognized, CSA Certified, CE

Click to view On-line eBrochure

Request a Catalog or Price Quote

ABB expands its Manual Motor Protector range (MMP) with the MS116 product series. The MS116 protects smaller single and 3 phase motors up to 10 Hp. It provides cost effective motor protection with only 11 setting ranges up to 16 amps; and with a possible 50kA rating, gives the customer a high level of safety.

•   UL Listed and CSA certified for group motor applications
•   Economical fuse-less protection up to 10 Hp. at 600V
•   Up to 30kA or 50kA with no back up fuse required
•   Class 10 Overload protection
•   11 setting ranges adjustable from 0.1 to 16 amps
•   Space-saving 45mm design
•   Optional front mounted 1 N.O. & 1 N.C. auxiliary contacts
•   IP 65 wall mounted enclosure in red & yellow, or black & gray
•   Many accessories available for safer, faster mounting & connection

ABB offers a full line of inductive, capacitive, photoelectric, and ultrasonic sensors in rugged corrosion resistant plastic or stainless steel enclosures.

Inductive Proximity Sensor
• 0.8 to 50mm range AC & DC
• PNP - NPN & Relay Contacts

Capacitive Proximity Sensor
• 0 to 10mm non-ferrous contact, virtually any material
• PNP - NPN & Relay Contacts

Photoelectric Sensor
• Diffused to 800mm, Retro-Reflective to 5m
• Fiber-optic for pin-point accuracy

Ultrasonic Sensor
• Programmable, discrete & analog up to 6000mm sensing range
• Includes RS-232 communication port
• Corrosion resistant Crastin plastic exteriors or all stainless steel exteriors are available.
• Welding field immune models are available
• UL, cUL, NEMA, CSA, CE

Would you like your installations to have that professionally installed look? ABB's line of insulated, non-insulated, and twin ferrules will give your work that "pro" look every time!

• Ensure reliable electrical connections and guarantee that all wire strands conduct current
• Eliminates wire strand spreading after wire is clamped into terminal block or other component
• Easy wire insertion into terminal blocks
• No breaking of wire strands in cases of bending, wire stress, or vibration
• Eliminates shorts
• Ideal for use with PLC's

Are you wasting time and money while connecting components on traditional DIN rail? ABB's new line of high profile aluminum rail may be the answer. Now In Stock for immediate delivery.

• This Aluminum rail comes in both 90 degree and 30 degree angles
• Is stocked in one and two meter lengths.
• The high profile makes it ideal for applications where increased distance from the back panel decreases wiring time of din rail mounted components.
• The 30 degree angled version improves field wiring of DIN components.
• The increased number of holes in the vertical wall of the rail reduces the wire and labor required to pass the wire through to the opposite side of the rail.
• ABB/Entrelec high profile aluminum rail is available from stock and is competitively priced.
  

The New ABB Timers & Monitoring Relays web site provides product selection options not available on other electronic relay web site. ABB has the widest selection of electronic relays in the industry; cross-indexed for fast selection. Design engineers, purchasing managers, service contractors, production engineers, can now find the most current product information quickly and easily.

• Select Product by Type: Timers, Flashers, Current Sensor
• Select Product by Enclosure: Octal Plug-in, Modules . . .
• Select Product by Series: TSD1, TDM, FS100, CT-MFS . . .
• Select Product by Part Number: TS1422, 1SVR430010R0200

Product types: Timers, Flashers, etc. are grouped together in interactive Fast Fact Pages. These pages provide a concise overview of each product's design capabilities with links to the complete technical specification pages. Then a complete part number search engine finds all active part numbers and suggests replacement P/Ns for obsolete P/N's. For the experienced product users, selection by product appearance is now possible. Click on a Product Photo and find its catalog pages. Two interactive eBrochures are included: ProgramaCube® & Motor Protectors^TM
eBrochures are product specific and each includes topical selection guides and interactive application notes that demonstrate how the products operate.

            Visit the NEW Timers & Monitoring Relays Website