SSAC AC Current Sensor & Controls 800-377-7722

AC Current Sensor & Controls

ECS Series

AC Current Sensor & Control

Switch Selectable Overcurrent or Undercurrent Sensing/Control
Onboard Adjust or Fixed Trip Point and Trip Delay
Trip Points from 0.5 to 50 Amps, for Higher Trip Points Use an External CT
Trip Delays to 50 Seconds
10 Amps @ 240VAC SPDT Isolated Contacts
Solid State - Encapsulated
12 to 230 V in 5 Ranges
2.5 x 3.5 x 1.75 Inches (64 x 89 x 44.5 mm)
0.36 Inch (9.14 mm) Through Hole
0.25 Inch Male Quick Connect Terminals
Popular Part Numbers are In Stock
UL Recognized, CSA Certified, CE

ECSW

Series AC Window Current Sensor & Control

Overcurrent & Undercurrent (Window Current) Sensing & Control
Detects Locked Rotor, Loss of Load, Open Heater or Lamp Load, Etc.
Trip Points from 0.5 to 50 Amps in 3 Ranges
For Higher Trip Points, use an External CT
Adjustable Trip Delays to 50 Seconds
Current Sensor is Included - 3 LED Indicators
10 Amps SPDT Isolated Output Contacts
12 to 230 V in 5 Ranges
Termination: 0.197 Inch (5 mm) Terminal Blocks
0.36 Inch (9.14 mm) Through Hole
3.5 x 2.5 x 1.75 Inches (88.9 x 63.5 x 44.5 mm)
Solid State - Encapsulated
UL Recognized, CSA Certified, CE

TCS Series

AC Current Interface for PLC or AC/DC Loads

Direct Connection to PLC Digital Input Module
3 to 50VDC, 24 to 240VAC in 2 Ranges
1A Steady, 10A Inrush Solid State Output
Trip Points - 2 to 45 Amperes (Fixed Units)
2 to 20 Amperes (Adjustable Units)
For Higher Trip Points Use an External CT
Normally Open or Closed Solid State Output
Complete Isolation Between Sensed Current and Control Circuit
Small Size, 2 x 2 x 1.75 Inches (50 x 50 x 44.5mm)
Encapsulation Protects Circuitry Against Shock, Vibration, and Humidity
UL Recognized, CSA Certified, CE

LCS10T12 with LPM12

AC Current Indicator

Low Cost Universal AC Current Indicator
Sensing Range - 1 Pass = 5 to 50 Amps, for Higher Currents Use an External CT
Sensing Range - 4 Passes = 1.3 to 12.5 Amps
Self Powered Easy to Connect
Indicator Can Be Up to 500 Ft. From Sensor
LPM12 is a Red LED in a Mounting Bezel
LPMG12 is a Green LED in a Mounting Bezel
LCS10T12 - 1.5 x 0.98 x 0.46 Inches (38 x 25 x 12 mm)
0.36 inch (9.14 mm) Through Hole
LPM12 - 0.75 x 0.28 Inches (19.81 x 7.11 mm)
In Stock
UL Recognized and CSA Certified

				More Products	Mouse Over Photo for ....Fast Facts.... Click for Catalog Page
ECS Series	ECSW Series	TCS Series	LCS10T12

Home

About SSAC	Product Selection	Customer Service	News Center	Contact Directory	Site Map	Terms of Sale
Express Catalog	Full Line Catalog	Product Index	Custom Products	ProgramaCube	Approvals	Warranty/Returns

Accessories

Alternating Relays

Current Sensors

Custom Product Design

Flasher, Solid State

HVAC/R Controls

Liquid Level Controls

Motion Detector

Motor Protectors

Obstruction Lighting Cnt.

Phase Monitors

Phase Angle Controls

Solid State Relays

Time Delay Relays

Timing Modules

Timers, Select Function

Tower Lighting

Vending Controls

Voltage Monitors,3 Ph

Voltage Monitors, 1 Ph

3 or 4 Channel Chaser

AC Current Transducer

SSAC Timers and Controls